Description
The Custom Lithium 310Ah Slim Lithium Battery adds 310Ah of 12.8V LiFePO₄ storage to 4WD canopies, caravans and touring setups where installation width matters. At 157 mm wide, it suits narrow compartments where a wider battery may be difficult to fit.
Built in Brisbane, the battery is rated for 330A continuous discharge and features an integrated battery management system with active cell balancing. It can supply fridges, lighting, water pumps and other touring equipment in a compatible auxiliary power system.

Custom Lithium 310Ah Slim battery for 4WD canopies and caravans.
Will the Custom Lithium 310Ah Slim Lithium Battery fit?
The battery measures 405 mm long × 157 mm wide × 275 mm high. Measure the available space at its tightest point, then allow room for mounting hardware, terminal access and cable bends. Measure the opening too, especially in a canopy with drawers or a caravan compartment with a narrow access door.
Check Custom Lithium’s mounting instructions for the permitted orientation. If you’re replacing an existing battery, have your installer check the tray and tie-down points and make sure the cables can reach the M8 terminals.
What can the Custom Lithium 310Ah Slim Lithium Battery run?
At 12.8V, 310Ah gives you about 3.97 kWh of nominal stored energy. Your runtime depends on the equipment you run, the usable battery capacity and any inverter losses. A fridge’s consumption, for example, changes with the weather, its settings and how often you open it.
List what you use each day and how long you run it. Include equipment that stays on for hours, such as a fridge or communications gear, as well as appliances that draw more power for shorter periods. Use our Camping Battery Calculator to estimate how much capacity you need between charges.
330A continuous discharge and battery management
The 330A continuous discharge rating helps you choose equipment for a higher-current auxiliary setup. If you plan to use a 240V inverter, have your installer check the combined loads and their starting surges against the ratings of the battery, inverter, cabling and circuit protection.
The built-in battery management system monitors the cells during use, while active balancing helps keep their voltages aligned. Custom Lithium bench-tests each battery before dispatch.
Matching your charging setup
Use charging equipment with a LiFePO₄ profile that matches Custom Lithium’s specifications. The manufacturer lists a 14.2–14.6V charge voltage and a 100A recommended charge current for this model. If you already have a DC–DC charger, solar controller or mains charger, ask your installer to check its settings before reusing it.
If you camp in one place for several days, consider how you’ll recharge. Driving time, solar conditions and access to mains power affect how quickly you can replace the energy you use.
Technical specifications
| Specification | Details |
|---|---|
| Model code | CL-S-310AH |
| Battery chemistry | Lithium iron phosphate (LiFePO₄) |
| Rated capacity | 310Ah |
| Nominal voltage | 12.8V |
| Nominal stored energy | 3,968Wh |
| Continuous discharge | 330A |
| Peak discharge and protection | 833A peak, 1,000A protection as listed by Custom Lithium |
| Recommended charge current | 100A |
| Charge voltage | 14.2–14.6V |
| Absorption/float voltage | 13.4–13.6V |
| Cut-off voltage | 10.5V |
| Operating temperature | 0°C to 60°C |
| Terminals | M8 |
| Overall dimensions (L × W × H) | 405 × 157 × 275 mm |
Australian-made battery with a seven-year warranty
Custom Lithium makes this battery in Brisbane and backs it with a seven-year manufacturer’s warranty, subject to its terms. Chargers, monitors, inverters and installation accessories are sold separately.
If you need less capacity, see our Custom Lithium Next Generation Slim Battery range for 100Ah, 200Ah and 230Ah options.
For help with fit or charging equipment, contact 4WD Lights and Camping with your mounting space measurements and a list of the equipment you plan to run.








