Description

REDARC RedVision Manager30 Kit

Prime RedVision System TVMSKIT05

Power Your Setup Anywhere with the Prime RedVision System from REDARC

REDARC RedVision Manager30 Kit experience next-level power management and control with the Prime RedVision System by REDARC. Designed to give you full control and visibility over your power usage, this smart system is ideal for camper trailers and mid-sized caravans. It supports setups with more than two water tanks and a combination of both high-powered and low-powered accessories. Whether you’re camping off-grid or relaxing at a powered site, this all-in-one solution keeps your batteries charged and your gear running smoothly.

The system combines advanced monitoring, automated control, and flexible charging into one sleek package. It includes the essential components needed to power up your build—just add batteries, cabling, and fuses. Built tough and designed for the harsh Australian environment, this powerhouse is made locally and tested to meet Australian safety standards.

Smart Charging on the Go REDARC RedVision

One of the biggest challenges when you’re off-grid is keeping your batteries charged. The Prime RedVision System handles that with ease. Featuring the REDARC Manager30, a multi-stage 30A AC/DC charger, it intelligently adjusts its output to suit your battery’s condition and charging source. Whether you’re hooked up to solar, running your vehicle, or plugged into mains power at home, the Manager30 ensures your secondary batteries remain fully charged and in top condition.

Additionally, the system includes a Maximum Power Point Tracking (MPPT) solar regulator, allowing you to make the most out of your solar panels. MPPT tech maximises the efficiency of your solar input by matching the panel output to the battery needs, resulting in faster and more effective charging, even in suboptimal conditions.

Furthermore, it includes a dual battery isolator, load disconnect controller, and a multi-stage DC-DC charger.  All components works together to manage energy distribution efficiently, ensuring that power goes exactly where it’s needed, when it’s needed.

Detailed Monitoring at Your Fingertips with REDARC RedVision Manager30 Kit

Knowing the state of your power system at a glance is essential for any serious camper or tourer. With RedVision’s advanced monitoring features, you’re never left in the dark. The Manager30 monitors charge and discharge rates, battery temperature, state of charge, and remaining capacity in real time.

These insights are displayed on the RedVision display panel or through a Bluetooth-connected app on your smartphone. As a result, you can monitor your system while sitting around the fire or relaxing in your caravan. This level of access not only adds convenience but also protects your investment by allowing you to make informed decisions about your energy usage.

Moreover, the system features six tank level inputs and two ambient temperature sensor inputs. This gives you comprehensive data on your water levels and climate conditions. Whether you’re tracking drinking water, grey water, or hot water, everything you need is easily viewable on one central display.

Total Control, In One System REDARC RedVision Manager30 Kit

One of the biggest advantages of the RedVision Prime System is the ability to control your entire setup from a single location. The system includes 10 output channels—five 30A and five 10A—plus a dedicated inverter channel, giving you control over up to 11 different devices. This is perfect for running a variety of on-board systems including fridges, fans, lights, pumps, and inverters.

Using either the RedVision display or the mobile app, you can switch devices on and off with ease. This means you don’t have to fumble around with individual switches or panels. Whether you’re inside your camper or outside enjoying nature, control is always just a tap away.

Not only does this improve convenience, but it also enhances safety. You can shut down high-powered devices instantly or power down your system during unexpected weather, all with the touch of a button.

Automated Efficiency Built In REDARC RedVision

Why waste time switching off lights or non-essential devices manually when RedVision can do it for you? One of the standout features of this system is its automation capability.

Create routines or conditions where certain loads automatically turn off when your battery voltage drops below a specific level. For example, you can program the system to keep your fridge running while turning off lights and fans when power gets low.

Additionally, automation routines can be used when arriving at camp or preparing to hit the road. A single button press can activate your full camping setup—turn on lights, power the fridge, and start your water pump. When you’re ready to leave, another press shuts it all down. This reduces hassle and ensures nothing is left running accidentally.

Durable, Australian-Made Quality REDARC RedVision

Built to handle Australia’s toughest conditions, the Prime RedVision System is made and tested right here in Australia. With a maximum current capacity of 80 amps and easy-access fuses, the system is not only powerful but also reliable and safe. It operates quietly and fits seamlessly into a range of different caravan and camper setups.

The included components are engineered for long life and smooth operation. From the multi-stage battery charging systems to the advanced monitoring display, every part has been designed with the end user in mind.

Full System Inclusions

Here’s what comes standard in the Prime RedVision kit:

• TVMS Prime RedVision Control Module
• Manager30 Battery Management System
• RedVision Display

Key Specifications:

• 5x 30A outputs for high-powered accessories
• 5x 10A outputs for smaller loads
• 80A total max current.
• 1x dedicated inverter output.
• 6x tank level sensor inputs.
• 2x ambient temperature sensor inputs.
• 1x voltage sensor input.
• Therefor it has fully programmable outputs.
• Compatible with AGM, Gel, Calcium, VRLA, Standard Lead Acid, and Lithium (LiFePO4) batteries.
• Meets Australian mains power safety standards.

• TVMSKIT05 (RedVision + Manager30 Kit)

  • Main Unit Dimensions: 445 mm (L) × 185 mm (W) × 79 mm (H)

  • Display Dimensions: 178 mm (W) × 108 mm (H) × 26 mm (D)

  • Total Weight: 5.5 kg

Conclusion: Take Command of Your Power

In summary, the Prime RedVision System from REDARC offers complete control, visibility, and confidence for any 12V setup. Thanks to its intelligent battery management, real-time monitoring, and automated features, it’s never been easier to manage off-grid power. Whether you’re heading into the outback or relaxing by the beach, RedVision ensures your setup runs smoothly—so you can focus on the adventure.

For those wanting a powerful, flexible, and Australian-made solution, the Prime RedVision System delivers it all in one impressive package.

https://www.facebook.com/4wdlightsandcamping.com.au

https://4wdlightsandcamping.com.au/product/manager-alpha100/